Solar PV Stand Forming Machine
I: Product technical parameters and requirements
Feeding material width range: 40-200mmRolling steel strip thickness: 2-2.5mmRolling steel strip material: Q235 cold steel stripWorking speed: 15-20m/minThe shortest rolling workpiece length: 2000mmThe rolling workpiece straightness error: 1-1.5 mm /1500 mmThe rolling workpiece angle error: ≤±1.5/1000mmThe rolling workpiece fixed length error: 10m±1.5mm
II: The product drawing
The max thickness of solar pv stand: 2-2.5mmProduct drawing as follows:
I: Product technical parameters and requirements
Feeding material width range: 40-200mmRolling steel strip thickness: 2-2.5mmRolling steel strip material: Q235 cold steel stripWorking speed: 15-20m/minThe shortest rolling workpiece length: 2000mmThe rolling workpiece straightness error: 1-1.5 mm /1500 mmThe rolling workpiece angle error: ≤±1.5/1000mmThe rolling workpiece fixed length error: 10m±1.5mm
II: The product drawing
The max thickness of solar pv stand: 2-2.5mmProduct drawing as follows:
No. | Name | Model and specification | Qty | Motor power(KW) | Note |
1 | Uncoiler | 5T Automatic uncoiler | 1 set | 4KW | Non standard |
2 | Leveling | 9 kuns leveling | 1 set | 5.5KW | outsourcing |
3 | Servo feeding | With a separate control system | 1 set | 5.5KW | outsourcing |
4 | Punching machine | JH21-80 High speed punching machine | 1 set | 7.5KW | |
5 | Control cabinet | Feeding material 300mm/times | 1 set | Set the details according to punch hole | |
6 | Main Forming machine | Driving bevel gear box | 1 set | 45KW | |
7 | Air pressure system | Flux : 0.5m3/min; pressure: 0.7Mpa |
1 set | Tracking | |
8 | Hydraulic cutting device | Hydraulic with energy storage | 1 set | 7.5KW | |
9 | Control system | The machine is PLC control system | 1 set | ||
10 | The loading table | Length: 3m | 2 set |